Arches

Tools: A stationery knife

To create a neat wallpaper connection in the arch locations, the plastic profile corner rail must be secured on the edges of the rim. One part of the profiling rail is cut into several places, which will allow it to be secured during rounding.

The profiling rails are then glued to the desired location, using the contacts, the edges sanded and scraped. Now the wallpaper can be easily and carefully trimmed along the profiling rail.

 Tip: Arches can be sticking with Non-woven wallpaper Master.

 

Sloping ceiling

Tools: ruler for edging, stationery knife

By gluing sloping ceilings, Non-woven wallpaper Mastervies Pro Trim the "fracture" instead. From the beginning, the slope itself glues and then the lower part of the overlap. The double cut method allows the smooth -edged joint to be glued, and the resulting connection is leveled with the help of a porous rubber roller.

Tip: If the "fracture" site is uneven, this defect can be hidden with a decorative border.

 

Radiator

Tools: ruler for edging, stationery knife

The radiator is glued "around the perimeter". Behind the radiators wallpaper is not glued!
Tip: With the help of a suitable border, you can create a beautiful frame or frame.

Holes

Tools: A stationery knife

The holes under the luminaires are sealed with wallpaper. After drying Non-woven In a wallpaper bar with a stationery knife, cut the required shape along the contour line.

Tip: You can glue open luminaires and socket rosettes. Disable the electricity in the room before cutting off the shape. After sticking in the strip, a cross should be immediately made and the socket elements from the glue should be cleaned. As soon as the wallpapers are dried, a hole in the size of the rosette is cut with the help of a stationery knife.