Wall

Tools: Level

As with the ceiling gluing process, the walls must be noted on the walls on which the first strip will be placed, which will allow the next lanes to be accurately placed. This goal requires a specific level.

The first strip should be placed so that part The ceiling from it, but the strip itself would move along the marked line. The wallpaper strip is attached to the wall with a porous rubber wallpaper roller that prevents bubbles and folds from forming.

Tools: Wallpaper for bonding a table or fur roller and brush glue to apply

If a table for wallpaper bonding is used, only elite glue should be used for mechanical tables with tg. It provides optimal adhesive distribution and facilitates the pulling of the slots through the device. Rich in the tile wallpaper strip and stick it without prior wet.

Tools: Porous rubber roller

Non-woven Wallpaper gluing is done in a collision, the bands are scrolled from both sides with the help of a porous rubber roller without leaving bubbles and folds.

Tools: plastic trowel, stationery knife

Wall/ceiling and wall/floor fold raised wallpaper part You need to press in the corner with a plastic filler and carefully trim.