Problem - Connections Deviation

Connection deviation

The connection deviation, paper

The possible cause of the connection mismatch during wallpaper bonding may be a blocked surface (reference to "surface properties and related problems" - the ability to absorb moisture), drafts or too fast to dry individual sheets. If you use a dispersion glue (eg Ovalit t), attention should be paid to significant increase in absorption time.

A well -prepared surface is sufficient with the use of standard glue. Special adhesive is recommended for critical or heavy paper wallpapers, and time changes should be taken into account for the period of soak.

It is recommended that the "folding meter" method is increased to increase the wallpaper soaking time. Its implementation requires a folding meter and clock.

Measure the strip width in dry condition (53 cm, 70 cm or 1.06 cm).

Apply the glue to the sheet as described in the attachment, fold it in half and roll it into the roll.

Apply a meter to the rolled and glue to the roller width. The width will be 53.4-53.5 cm. This step must be repeated again and watching the clock at the same time. When the wallpaper width reaches 54 cm, this is a great moment to glue the wallpaper to the wall. Thanks to this method, you can find out how long it takes to impregnate future strips.

Compound deviations, flizeline

The cause may be incorrect dosage of glue, drafts or inappropriate surface for wallpaper bonding.